|
The alloy boasts good shaping property, high corrosion
resistance, weldability and fatigue strength, medium static strength, is used to
make airplane oil tank, oil pipe, metal sheet and instrument for vehicle and
vessel, street lamp post and riveted wire. |
|
Shanghai BRESS aluminum Co.,Ltd Optional specification of 5052 Stock list | ||||
| Optional specification | Temper | Thickness（mm） |
Width*length （mm） |
Adopted standard |
| Sheet |
H12/H14/H16/H18/H22/ H24/H32/H34/H38/O/H111 |
0.15～～4.0 | 300~1600(width)*800~6000 |
GB/T 3380 EN 485 ASTM B209 JIS H4000 |
| Plate |
H112/F/O/H111/ H12/H14 |
4.0～～120.0 | 300~1600(width)*800~4000 |
GB/T 3380 EN 485 ASTM B209M JIS H4000 |
| Coil |
H12/H14/H16/H18/H22/ H24/H32/H34/H38/O/H111 |
0.15～～6.0 | 300~1600(width)*C |
GB/T 3380 EN 485 ASTM B209 JIS H4000 |
|
5052 (Chemical Composition Limits wt%) | |||||||||
|
Cu |
Si |
Fe |
Mn |
Mg |
Zn |
Cr |
Ti |
Pb.Bi |
Al |
|
0.1 |
0.25 |
0.4 |
0.1 |
2.2-2.8 |
0.1 |
0.15-0.35 |
/ |
/ |
Remainder |
|
5052-H32(Typical Mechanical & Physical Properties) | ||||
|
Weldable |
Machinability |
Corrosion Resistance |
Electrical Conductivity |
Digital Density |
|
A |
C |
A |
D |
2.68 |
|
Tensile Strength |
Yield Strength |
Hardness(HB) |
Elongation |
Shearing Strength max. |
|
230 |
195 |
60 |
10 |
140 |
|
5052-O/H111(Typical Mechanical & Physical Properties) | ||||
|
Weldable |
Machinability |
Corrosion Resistance |
Electrical Conductivity |
Digital Density |
|
A |
C |
A |
D |
2.68 |
|
Tensile Strength |
Yield Strength |
Hardness(HB) |
Elongation |
Shearing Strength max. |
|
195 |
90 |
46 |
25 |
|
|
5052-H34(Typical Mechanical & Physical Properties) | ||||
|
Weldable |
Machinability |
Corrosion Resistance |
Electrical Conductivity |
Digital Density |
|
A |
C |
A |
D |
2.68 |
|
Tensile Strength |
Yield Strength |
Hardness(HB) |
Elongation |
Shearing Strength max. |
|
260 |
215 |
68 |
10 |
|
|
Explain: | ||||
| Grade | Weldable | Machinability | Corrosion Resistance |
Electrical Conductivity |
| A | Easy to welded | Excellent | Very good | 55-63 |
| B | Weldable in most of application cases | Very good | Good | 50-55 |
| C | Welding is restrained | Good | Average | 40-50 |
| D | Welding is not recommend | Not goood | Bad | 30-40 |